Changxun Machinery +86 134 0908 0470  |  ren@zbcxhb.net

What a valve test bench costs, and what moves the number

Four things decide the price: the largest DN you test, the pressure class, the clamping force that DN needs, and whether you also test with air. Two workshops asking for "a valve test bench" can be 40% apart, because one tops out at DN200 and the other at DN600. Send us those four numbers and we return the model, the price and the delivery date the same working day.

FOB Qingdao
Wooden case included
35-55 days
Delivery after deposit
Built in Zibo, Shandong
Tested before shipment

Three models cover most valve workshops

All machines: hydraulic clamping, 1.6 - 40 MPa, hydrostatic test to the valve class you use (API 598 / ISO 5208 / EN 12266-1). One gauge set as standard; dual gauge only if you test both ends of the range.

Most ordered

ZSYJ-300A

Vertical, fully automatic - DN50 to DN300
Price on requestQuoted on your DN range and pressure class
  • Range 1.6 - 40 MPa on every bench; one gauge set as standard
  • Hydraulic clamping, 80 t
  • PLC logging, test report exportable per valve
  • Delivery 35-45 days
Ask for the price
Water + air

SYJ-600SQ

Vertical, hydrostatic and air leak - DN50 to DN600
Price on requestQuoted on your DN range and pressure class
  • Water to 40 MPa on small bores, air 4 MPa
  • Top clamp 90 t, movable work table
  • One bench for both tests, no second station
  • Delivery 40-50 days
Ask for the price
Large valves

WBD-600

Horizontal, ram + 3 jaws - DN50 to DN600
Price on requestQuoted on your DN range and pressure class
  • Water to 16 MPa, set by the valve class
  • 150 t ram, 3 x 100 t jaws
  • Big gate, butterfly and ball valves lie flat - no crane over a portal
  • Delivery 40-55 days
Ask for the price

What moves the price

These five items account for almost all of the difference between two quotations for the same model name.

VariableWhat it changes on the machineHow much it matters
Largest DN you test Frame size, table size, clamping stroke, blanking plate diameter The single biggest item. A DN600 frame carries steel and hydraulic force a DN200 machine never needs.
Pressure class Pump, intensifier, valve block, pipe rating, gauge range 40 MPa on DN50 costs far less than 16 MPa on DN600 - the frame, not the pump, dominates at large sizes.
Clamping force Ram or top cylinder, jaw count, hydraulic power unit Follows from DN and pressure together. It is calculated, not chosen from a list.
One gauge or two Second gauge set, changeover manifold, extra piping, one more calibration Only needed if you test both 1.6 MPa valves and high-pressure valves on the same bench.
Air test circuit Air compressor interface, low-pressure circuit, second test sequence Needed for air-tightness testing to 4 MPa. Water-only benches do not have it.
Why we do not print a price list. A published figure would have to assume a DN range and a pressure class, and it would be wrong for most workshops reading it. A workshop testing DN15-DN100 gate valves at 1.6 MPa and one testing DN500 butterfly valves at 10 MPa are not buying the same machine, even if both are "a valve test bench". Give us your numbers and the quotation is exact, not indicative.

One gauge or two - this is where the cost moves

Every bench we build covers 1.6 to 40 MPa. What changes is how many gauge sets sit on it, and that follows the valves you actually test.

Your valvesWhat we buildWhy
All valves 16 MPa class or below Single gauge, low range The gauge reads in the band where your valves sit, so 1.6 MPa is a readable number, not the first millimetre of the dial.
All valves above 16 MPa Single gauge, high range (16 - 40 MPa) Same reason at the other end. A low-range gauge would be off the scale.
Both - some valves at 1.6, some at 40 Dual gauge, high / low changeover block Two gauge sets with a switchover valve block. You turn to the range that suits the valve on the table. This version costs more - second gauge set, changeover manifold, extra piping and one more thing to calibrate.

What the quotation covers

IncludedNot included / optional
Machine, hydraulic power unit, one gauge set (low or high range), PLC and test report software
Export wooden case, FOB Qingdao
Operation manual, electrical drawing, one set of seals
Commissioning support by video, English
Sea freight, insurance, import duty
Dual-gauge version with changeover block (quoted per DN)
Air test circuit, extra jaws, dual station (quoted per valve)
On-site commissioning (travel and visa at cost)
Video record of each test

Four numbers are enough to get an exact figure

Largest DN, highest pressure class, valves per day, and whether you also test with air. We reply with the model, the price and the delivery date - normally within a few working hours, always the same working day.

Send the four numbers Or email us directly

Common questions

QuestionAnswer
Why don't you publish a fixed price?Because clamping force, frame size and gauge set all follow the largest valve you test. A workshop topping out at DN200 does not pay for a DN600 frame, and a published figure would overcharge one buyer and mislead the other. The quotation is built on your numbers.
How fast is the quotation?Same working day in most cases, always within 12 working hours. If your DN range and pressure class are clear, no further questions are needed before we quote.
Can the bench test to 40 MPa on DN600?No. 40 MPa is used on small bores. DN350-DN600 are tested at the pressure their class requires, up to 16 MPa.
What is the payment term?30% deposit, balance before shipment. FOB Qingdao. Quotations are held for 30 days.
Can we see a machine running before ordering?Yes. Our workshop is in Zibo, Shandong. You can watch your own valve tested before the machine ships.
Do you supply spare parts?Seal kits and jaws are in stock. We keep the drawings of every machine we ship.